This article will show you how to build a chicken coop step-by-step with pictures. First, you need to construct the frame for the coop. This is the basic structure for the henhouse. The side battens should be parallel and the vertical battens should be placed 21 inches apart. It is also important to make sure that the coop is square. After that, you can attach the roof and floor.
The roof is a crucial part of your coop. You can use different materials for this. You can either use wooden boards or metal studs, but it’s advisable to use strong and durable wood for the roof. When you’re done, you can now start constructing the walls. Regardless of the design, you’ll need to reinforce the sides and the roof for safety. For doghouses, you can also add a run. And finally, before you put the panels, you’ll need to cover the holes with hardware cloth. Hardware cloth is stronger than chicken wire and can be attached easily with screws or staples.
Next, you’ll need to construct the walls of the coop. You’ll need to build the walls with two layers of plywood and a base made of wooden planks. Once you’re done with this, you’ll need to add nesting boxes. You can use simple dividers or boxes to provide nesting space for the chickens. The doors and windows should be secured with predator-proof latches and hardware cloth. The small openings in the walls will allow minks and other animals to squeeze through.
Once you have completed the foundation, you can proceed to building the walls. Depending on the size of the coop, you may need to cut up to 20 boards. Ensure that you include enough room for the hens. Afterwards, you should build the windows and doors. The roofing should be built last. Once you’ve completed the walls, you’ll need to finish the coop.
After assembling the frame, you need to construct the roof and side panels. You can also use plywood for the sides. The panels should be glued and screwed to the roof. In between the walls, you can fit your coop with shingles or corrugated sheet metal. If you’re a woodworker, this is a good plan to follow. Moreover, the drawings and material list are very useful.
Once the roof is in place, you can start building the coop’s walls and panels. Then, build the roof. The roof and panels must be built with OSBs and battens. The roof and sides should be constructed last, and then the roofing. Then, you should build the roost. Once you’ve finished the roost and side panels, you can add the roof and panels.